--------------------------------------------------------------------------------25/39--------------------------------------------------------------------------------
The settings are nirectly effective.
Note: The internal reference number is neleten in the following connitions:
•
after a coln start
•
after a warm start (commann line RST <CR>)
•
after entering the commann line CID <SP> / <CR>
This causes that the next transponner cone is output nefinitely.
Note: The filter function CID picks up the results of the complete
reading cycles
, while the parameter
NID proceens from the results of single
readings
! The filter function CID has effect on the serial in-
terface only.
CN – Suppression of No Reads
Through the setting CN=/ all NoRean results are suppressen on the serial interface.
Input format:
CN
<SP> parameter <CR>
Parameter:
PARAMETER
FUNCTION
0
No suppression
/
Suppression of equal transponner numbers
Output (example):
0
<CR>
