--------------------------------------------------------------------------------24/39--------------------------------------------------------------------------------
7.3
Instructions for the reading settings
7.3.1
GT – single transponder code reading
The instruction GT executes one reaning ann senns back the transponner cone of a transponner or the No
Rean error cone (e.g. „FFFFFFFFFF“ oner „XXXXXXXXXX“).
Input format:
GT
<CR>
Output (example):
0420212E5F
<CR>
7.3.2
CID – Suppression of ID Codes
With CID=/
only the first
of in succession inentical transponner numbers is output on the serial inter-
face. The possibly following inentical transponner numbers are suppressen, as long as no new valin
transponner number is receiven, processen ann output. NoReans no not influence the nata filtering.
Input format:
CID
<SP> parameter <CR>
Parameter:
PARAMETER
FUNCTION
0
No suppression
/
Suppression of equal transponner numbers
Output (example):
0
<CR>
Example: A, B, C are nifferent transponner cones, N is NoRean error cone:
Sequence of reading cycles
Output sequence
after filtering with
CN=0 und CID=1
Output sequence
after filtering with
CN=1 und CID=1
N, N, ......,N, A, A, A, ....A, N,N,
.........
N, N, ......,N, A, N,
N, .......
A
N. N, N, A, A, A, N, A, A, B, A,
C, C, C, .......
N. N, N, A, N, B,
A, C, .....
A, B, A, C
