manualshive.com logo in svg

AEG 79669GO-MN, User Manual

Share
Download
AEG 79669GO-MN User Manual Download Page 36

36

INSTALLATION OF THE APPLIANCE (CONTINUED)

Slot-in Installation

Slot-in Conversion

To convert the free standing appliance to a slot in 

installation the kick panel provided on the appliance 

is removed and the appliance is mounted on a plinth . 

This enables a continuous cupboard kick board to 

be installed, giving a more integrated appearance . 

There is no clearance requirement between oven and 

adjacent side cabinets .

600mm minimum vertical 
clearance from combustible 
surfaces or a Rangehood . 
Refer to Rangehood 
instructions for minimum 
clearance to the hob .  
The greater applies .

600mm

755mm max

900mm minimum

This surface is to be 
level with the top edge 
of the kickboard

To remove the appliance kick panel

•   Remove all loose parts ie . Burner crowns & caps, 

trivets, oven shelves .

•   Carefully lay down the appliance onto one side onto 

foam packaging and remove the screws as shown 

from each corner bracket .

Remove 4 screws on 

each corner bracket

Summary of Contents for 79669GO-MN

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands