AEG 79669GO-MN, User Manual

Page: 19 / 48

19
Installing the standard burners
1. The burner crown must be fitted correctly onto
the burner cup or damage will occur during
operation .
2 . To do this, align the outer hole and outer recess
of the burner crown around the spark plug and
flame safeguard sensor. Drop down ensuring the
location ribs on the bottom of the crown drop
into the location recesses .
3 . Burner cap and burner crown must be clean and
located correctly for the burner to light .
Installing the wok burners
1. The wok burner crowns must also be fitted
correctly onto the wok burner cups .
2 . To do this, align the outer recess of the burner
crown around the spark plug . Drop down
ensuring the location of the ribs on the bottom of
the crown drop into the location recesses .
3 . The 2 burner caps are simply positioned over the
top of the burner crown .
NOTE: When the burners are correctly fitted they will
sit level on the hob .
13 Wok burner outer cap
14 Wok burner crown
15 Wok burner body
16 Low heat burner
17 Medium heat burner
18 High heat burner
BEFORE USING THE APPLIANCE – GAS HOB MODEL (CONTINUED)