AEG 30Z, Instruction Manual

Page: 29 / 121

Useful skills
Various ways to achieve better results for your sewing projects are described below. Refer
to these tips when sewing your project.
A trial piece of fabric should be sewn because, depending on the type of fabric and
stitching being sewn, the desired results may not be achieved.
For the trial sewing, use a piece of fabric and thread that are the same as those used for
your project and check the thread tension and stitch length and width.
Since the results differ depending on the type of stitching and the number of layers of
fabric sewn, perform the trial sewing under the same conditions that will be used with
your project.
1. Stop the sewing machine when you
reach a corner.
2. Lower the needle into the fabric.
3. Raise the presser foot.
4. Use the needle as a pivot and turn the
fabric.
5. Lower the presser foot and resume
sewing.
Sewing corners
Raise the presser foot and place the fabric
under the foot.
Lower the needle into the fabric.
Lower the presser foot and smooth the
threads toward the back. Depress the foot
control.
Starting to sew
Slightly change the sewing direction to sew
around the curve.
Sewing curves
27
Instruction manual for Model AEG 30Z /AEG 35Z