AEG 10648, Instructions For Use Manual

Page: 15 / 72

English 15
Normal use
The jumper leads are used to start a ve-
hicle with drained battery by bridging
with a good battery (jumper battery).
This device is not intended for use by
children or persons with limited mental
capacity or lacking experience and/or
lacking expertise. Children should be
supervised to ensure they do not play
with the device.
This device is not intended for commer-
cial use. any other use or modification
of the device is considered improper
and involves significant risks.
The manufacturer assumes no liability
for damages due to improper use.
Contents
Be sure to verify contents immediately
upon opening the product. Check the
product and all parts for damage. Do
not use a defective product or parts.
•
Jumper leads
•
Bag
•
Instructions for use
Please include all relevant documenta-
tion to other users!
Technical specifications
The jumper leads meet the require-
ments of DIN 72553 and are suitable for
wiring system voltages from of 12 V.
The leads consist of insulated,
copper-clad aluminium wires with fully
insulated terminal clamps.
Typ DIN 25
Item No. 10648
Cross-section*
Length 25 mm
2
/
2 x 3.5 m
For engine
displacement
up to Petrol:
5500 cm
3
Diesel:
3000 cm
3
Batteries 8 x LR 1130 (LR 54)
(2 per clamp)
* The electric conductance corresponds
to a copper lead of this cross-section.