Portable Power - Anytime, Anywhere!
Thank for purchasing the Cobra CPP 7500 E JumPack™
jump starter portable PowerPack. Before using this product,
please read these instructions carefully to learn about the
features and capabilities of the JumPack and how you can
get the best out of it.
Note:
Please charge your CPP 7500 E JumPack completely
prior to using it for the first time.
Failure to follow instructions can result in personal injury or
product damage.
Charge the JumPack fully prior to use.
WARNING:
Keep the unit clear of fire and water.
WARNING: Shock Hazard.
Keep away from children. Do not
insert foreign objects into the jumper cables port/jack, the USB
output port, or the DC input jack. Do not expose this product to
water, rain, snow, condensation, or spray. Do not open the
JumPack. No user replaceable parts are inside the JumPack.
WARNING: Explosion Hazard.
Do not use this product where
there are flammable fumes or gases, such as in the bilge of a
gasoline-powered boat, or near propane tanks.
The jump start cable clamps must be connected positive to
positive (red clip to battery (+)) and negative to negative (black
clip to battery (-)). A reverse polarity connection (positive to
negative) may cause damage to the JumPack and/or create a
sparking/explosion hazard.
WARNING: Fire Hazard.
Do not crush or puncture the JumPack.
Never allow the jump start cables’ red and black clamps’ metal
contacts to touch each other or another common metal
conductor. This could cause damage to the unit and/or create a
fire hazard. Always disconnect the jump start cables from the
JumPack after each use and store separately. The jump start
feature is designed for short term operation only. Turn the ignition
key for
no more than 3 seconds
at a time. Operating the jump
start feature for more than
3 seconds
may cause damage to the
unit. Allow the JumPack to cool down for at least
1 minute
after
each jump start attempt.
IMPORTANT SAFETY INSTRUCTIONS
Caution: Operating temperature
Do not expose the JumPack to temperatures over +113° F (+45° C) or
under -14° F (-10° C). Using the JumPack at high or low temperatures
may reduce the internal battery capacity and shorten the battery life.
Note:
In extreme cold weather conditions, please bring the JumPack
indoors for best results.
Precautions when working with batteries
WARNING: Explosion and fire hazard
1.
Follow all instructions published by the battery manufacturer and
the manufacturer of the equipment in which the battery is installed.
2.
Make sure the area around the battery is well-ventilated.
3.
Never smoke or allow a spark or flame in the vicinity of the engine
or batteries.
4.
Be careful not to drop a metal object on the battery or allow a metal
tool to simultaneously touch the positive and negative cable ends or
battery terminals.
5.
Remove personal metal items such as rings, bracelets, necklaces,
and watches when working with batteries. Batteries produce a
short-circuit current high enough to weld a ring or other similar
objects to metal, causing a severe burn.
6.
Someone should be within range of your voice, or close enough to
come to your aid when you work near batteries.
This battery is self-contained and not consumer replaceable.
Battery must be disposed of properly when it no longer holds a
charge. Proper charging practices will increase the life of the
batteries.
Recharging the JumPack:
The CPP 7500 E JumPack can be recharged with the supplied 220 V AC
wall charger connected to an AC home outlet or with the supplied 13.8 V DC
vehicle charger.
When the CPP 7500 E is charging; the LEDs will show the current
battery life. The last LED that is lit will blink to show that the JumPack
is charging. When the JumPack is fully charged the LEDs will turn off
automatically.
For best battery performance the JumPack should be fully recharged
every 3 months.
Adaptors
.3.
.2.
.1.
Operation:
Home adaptor Car adaptor
Power/Flashlight/Battery
Capacity Button
LED Flashlight/Strobe
Light/ S.O.S Light
USB 5V/2.1 Amp Output
12V DC Charge Input
Jump Starter Cable Input
Battery Status Indicator LEDs
Jumper cable with clamps
Product:
©2014 Cobra Electronics Corp. Part No. 480-977-P Printed in China Version A
CPP 7500 E
User Manual
CPP7500E_MANL_ENG.indd 1
7/3/14 12:10 PM
