Installation
Unpacking
All transit bolts and packing must be removed before using the appli-
ance.
Using the sup-
plied spanner,
unscrew and
remove the 2
rear bottom
screws. Slide out
the 2 plastic
pins. Lay the
machine on its
back, taking care not to squash the hoses.
This can be avoided by placing one of the
corner packing pieces between the
machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the
two plastic bags.
Carefully slide out
the left-hand bag
removing it
towards the right
and then down-
wards.
Slide out the
right-hand bag
removing it
towards the left
and then
upwards.
Set the machine
upright and
remove the
remaining rear
screw. Slide out
the relevant pin.
Plug the open holes with the plugs which you will find in the plastic bag
containing the instruction booklet.
82
P1129
P0001
P1124
2
3
1
P1
P1126
126
P1127
P1128
P0002
132981740_gb.qxd 16/05/2006 15.09 Pagina 82