•
Alarm code
indicating a fault in the machine operation (see page 78).
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the
various phases making up the programme come on.
After the machine has started, only the running phase pilot light stays
on. When the programme has finished, the FIN
(End) pilot light comes on.
When the programme has finished, if the SOBRE-
DOSIFICACION light (Overdosage) comes on, it
indicates that too much detergent has been used.
Cancelling a programme
To cancel a programme which is running, turn the
programme selector dial to the
O/OFF
position (ANULACION/PARA-
DA).
Warning!
After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to
O/OFF
and then to
the programme DESAGUAR or CENTRIFUGAR.
Altering a programme which is running
To modify the selected programme turn the programme selector dial to
O/OFF
and then choose a new programme.
The water is
not
emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
Altering an option which is running
To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O
and then choose a new programme.
The water is
not
emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
57
Description of the appliance
ACLARADO
AC
CENTRIFUGADO
FIN
PUERTA
PRELAVADO/
LAVADO
SOBRE-
DOSIFICACION
RINSE
RINSE +
SPIN
END
DOOR
PREWASH/
WASH
OVER-
DOSAGE
132981740_gb.qxd 16/05/2006 15.09 Pagina 57