63
Installation Instructions
1
Attention:
The new appliance may only be installed and connected by
an approved specialist.
Please comply with this. If you do not, any damage resulting is not cov-
ered by the warranty.
1
Safety information for the installer
•
The electrical installation is to be set up so that the appliance can be
isolated from the mains with a minimum 3mm all-pole contact sepa-
ration.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses
are to be taken out of the holder), RCD’s and contactors.
•
The site must provide a connection to the electrical supply by means
of a socket such that the socket is accessible and outside the coordi-
nation space.
•
The built-in unit must meet the stability requirements of DIN 68930.
•
Built-in ovens and built-in cooking surfaces are fitted with special
connection systems. For safety reasons, they must only be combined
with appliances from the same manufacturer.
Summary of Contents for COMPETENCE KB9800E
Page 1: ...COMPETENCE KB9800E Built In Electric Oven User information...
Page 64: ...64...
Page 65: ...65 alternativ...
Page 66: ...66...
