4.2
Pushbuttons
The controller has two pushbuttons that are used to perform all settings and carry out programming. The
buttons may be operated simultaneously or individually.
Next OK
Functions of the Next button:
-
Alternating between the main menus in programming mode.
-
Changing a setting in the submenus.
Functions of the OK button:
-
The load may be switched on and off manually by briefly pressing the OK button. The LED’s briefly light up red when the
load is switched off and green when the load is switched on.
-
Acknowledge a setting in the submenu.
- Switching from main menu to submenu.
-
Returning from submenu to main menu.
Please consult the following section for procedures for programming the controller as well as structuring the programming
level.
5
Programming the Controller
5.1
Programming Operations
The 1st program is entered by pressing both buttons simultaneously. The controller exits programming mode by
pressing again or after 1 minute elapses without entering data. In any case all changes are stored permanently.
Next OK
Programming mode is displayed by illumination of the red programming LED.
SLX Night Operating Instructions
page 9
