5.6
Time Setting for Morning Light
The morning light function makes it possible to specify the time at which the consumer (e.g. light) is switched on. The
consumer is switched on at the time
programmed and is switched off again as dusk
falls.
In the morning light program acknowledge using “yes” to
specify the time the controller switches off. The
left-hand LED then lights up green and you may select the
following switch on times: s.Tabelle 4
Yes
No
Morning light
Switch on time
23:00
00:00
01:00
02:00
03:00
04:00
05:00
06:00
07:00
Press the Next button to switch between the settings and the OK button to
store the time.
The timer function is based on learning the brightness curve, therefore it
must be noted that the charge controller needs approximately 2 days to learn
the time from sunrise to sunset and during this time the load is switched on
all night.
Tabelle 4
SLX Night Operating Instructions
page 16
