IST6
Series (200K-600K) Modular UPS
User Manual
1 Safety Description
All rights reserved ©
Allis Electric
Co., Ltd.
5
1.1.3 ESD Protection
To prevent human electrostatic damaging sensitive components (such as circuit board), make sure
that you wear a anti-static wrist strap before touching sensitive components, and the other end is well
grounded.
1.1.4 Grounding Requirements
The device must be grounded before wiring. The grounding terminal must be connected to earth.
When installing, the device must be grounded first. When dismantling, the grounding wire must
be removed at last;
Don't damage the grounding conductor;
The device must be connected to protection grounding permanently. Before operation, check the
electrical connection to ensure the device is grounded reliably.
1.1.5 Warning Label Setting
In order to avoid accident for the unwanted person gets close to the UPS or makes improper
operation, observe the following requirements while installing, maintaining or repairing.
Set warning marks where the switches are to avoid switching them on improperly.
Set warning signs or safety warning belt in the operation area, which is to avoid human injury or
device damage.
After maintenance, please pull out the key of the UPS and save it properly.
1.2 Operation and Maintenance Requirements
There exists high temperature and high voltage inside the UPS. Please comply with the relevant
safety regulations and operation procedures during installation, operation and maintenance to avoid
human injury or device damage. The safety precautions mentioned in the user manual are just as a
supplement to the local safety regulations.
Summary of Contents for IST6
Page 1: ...UPS IST6 200 600kVA Series User Manual www aecups com ...
Page 123: ......