Screw Compressor Central Chiller
Chapter 4: Operation
38
To view the status of the chiller compressors, start at the Main Menu screen, then:
1.
Press the
or
buttons on the right side of the screen to highlight
“
COMPRESSOR STATUS
”
2.
Press
The compressor status screen displays:
Compressor Status Screen
The Compressor Status screen shows the status for compressors within the system. Only
compressors that are included in the system will be shown on this screen. Compressors will
display one of the following states:
1.
OFFLINE
– This indicates that the compressor has been turned off in the
compressor enable/disable screen. The compressor will not be called to operate until
it has been re-enabled.
2.
READY
– Indicates that the compressor is enabled and ready to run. However, the
current loading does not require the compressor to be running. This compressor will
be automatically started when needed.
3.
RUNNING
– Compressor is currently running.
4.
FAULT
– A safety on the compressor indicates a fault condition and the compressor
has been deactivated. Once the problem is remedied, the compressor will return to a
READY state unless it is put in the OFFLINE state.
