Is170TC-0 Rev. 211004-0
19 - 56
Component description
English
For the purpose of carburetion adjustments, the Oxygen Sensor provides information to the
COMPUTER about the quantity of oxygen existing in the exhaust gases. If a high level of
oxygen is present in the exhaust, the carburetion is LEAN (small amount of fuel). If a low
level of oxygen is present in the exhaust, the carburetion is RICH (large amount of fuel).
To sort out the signal carrier wire of an Oxygen Sensor, we recommend using a digital
multimeter. Set the instrument to measure DC; put a probe to battery GROUND; with the
other probe check which wire carries a variable voltage. It is important that the Oxygen
Sensor is hot before performing this test.
VEHICLE CONFIGURATION MENU
SETTING TYPE
ACTIVE SETTING
O2 Sensor type
0-1 V
0-5 V type A
0-5 V type B
5-0 V type A
5-0 V type B
0,8-1,6 V
Type of O2 sensor simulation
Open circuit
Ground simulation
Square wave
O2 sensor reading delay
5-1275 seconds
The stepper motor has the function of modulating the flow of the GAS taken in by the
engine. It maintains optimal values of carburetion in any operational condition. To that end,
the “
GALILEO
” processes the THROTTLE POSITION SENSOR, OXYGEN SENSOR and RPM
SIGNALS.
VEHICLE CONFIGURATION MENU
SETTING TYPE
ACTIVE SETTING
Maximum actuator position
20-240 steps
Minimum actuator position
20-240 steps
Full throttle option
DISENGAGED
ENGAGED
Actuator position during full throttle
20-240 steps
(to enable this option it is
necessary to enter a Full throttle option
“ENGAGED” at which this option is engaged)
Full throttle TPS
0-5 V
Cut-Off option
DISENGAGED
ENGAGED
Lower RPM Cut-Off threshold
0-8000 RPM
(to enable this option it is
necessary to enter a Cut-Off option
“ENGAGED” at which this option is engaged)
Actuator position during Cut-Off
20-240 steps
Optional default lock
DISENGAGED
ENGAGED
Default locked value
20-240 steps
(to enable this option it is
necessary to enter a Optional default lock
“ENGAGED” at which this option is engaged)
OXYGEN SENSOR
GREY AND
PURPLE WIRE
STEPPER MOTOR
Summary of Contents for AEB170TC
