ADWEL WTD-501, Operating Manual, Page: 28 / 57

28
1.
manufacturer (drop down list, or type in);
2. voltage (type in);
3. current (type in);
4. frequency (type in);
5. rotation rpm (type in);
6. temperature (with drop down list for degrees in K, C, or F);
7. pressure (with drop down list for units in atm, bar, mmHg, or kPa);
8. power (drop down list for HP, MW, or kW) rating and factor (type in for both);
9. insulation (with drop down list for selection);
10. year of installation and year of rewedging (use scroll arrows).
Figure 24: WTD Properties Nameplate Tab
When the tabs are filled in, the unit configuration data will be saved in a directory that has
the station name. In the future, when wishing to perform a test on this unit, follow the
procedure in the next sub-section.