19
3.4
VALUES FOR COLOR DEFAULTS
Choosing this selection from the Main Menu brings up a sub-menu that displays 14 colors on
a color monitor. Choose the colors to display the tight and loose wedge conditions.
If 3 categories are being used good choices for the color defaults are
red
for (loose) values
of 0 to 33;
yellow
for (hollow) values ranging from 34 to 66; and
green
for (tight) values
that range from 67 to 100. White is the default indicating No Data, and is not user
configured. Color can be set or changed at any time. During testing, it is necessary to Exit
the test to change colors for displaying wedge tightness data.
3.5 FILE
MANAGEMENT
The default directory set by ADWEL is:
C:\Program
Files\ADWEL
User can select any other directory as INSTALLDIRECTORY.
The following sub-directories are required and created by proper installation of WTD
software for operation: CALIB, DATA, SYSTEM, TEST and UNITS.
By default, all calibration files are stored in [INSTALLDIRECTORY]\CALIB and all test
data are stored in [INSTALLDIRECTORY]\DATA. User can use
Save As
during
calibration file creation, and save the file in any other directory.
Sub-directory Units is used to store Station/Unit data. System settings are stored in
\ADWEL\SYSTEM, and \ADWEL\TEST is used for temporary file during the test.
Using command Import and Export in Unit Menu, user can import or export one or all unit
configuration files.
NOTE: See Section 5.6 for default data folder settings.
Summary of Contents for WTD-501
Page 51: ...51 APPENDIX 1...