22
3
In the direction determined in
2
, fix the attachment plate (accessory) on the base bracket
using the fixing screws (accessory).
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
Note:
• The direction of “
⇧
TOP” on the attachment plate (accessory) determines the upwards
direction of the image on the PC monitor.
• For ceiling mounting:
Determine the direction that you want images to be displayed upwards on the PC monitor,
and then mount the attachment plate (accessory) with “
⇧
TOP” facing this direction.
• For wall mounting:
The attachment plate (accessory) shall be mounted with “
⇧
TOP” facing upward.
IMPORTANT:
• For installations on the wall, to prevent water from accumulating on the surface of the
dehumidifying device (
☞
page 12), do not connect it at the upper side. If water remains
inside, the dehumidifying device cannot function properly.
4
Pass the cables through the hole for cable running from the ceiling or wall, and then pass the
cables between the attachment plate (accessory) and base bracket to the outside.
Attachment plate (accessory)
Fixing screws (accessory)
TOP
Direction marker for installation
