2
NOTE: This equipment has been tested and
found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful interfer-
ence to radio communications.
Operation of this equipment in a residential area
is likely to cause harmful interference in which
case the user will be required to correct the inter-
ference at his own expense.
FCC Caution: To assure continued compliance,
(example - use only shielded interface cables
when connecting to computer or peripheral
devices). Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
For U.S.A
The model number and serial number of this
product may be found on the surface of the
unit.
You should note the model number and serial
number of this unit in the space provided and
retain this book as a permanent record of your
purchase to aid identification in the event of
theft.
Model No.
Serial No.
For U.S.A
CAN ICES-3(A)/NMB-3(A)
For Canada
WARNING:
• To prevent injury, this apparatus must be
securely attached to the wall/ceiling in
accordance with the installation instructions.
•
All work related to the installation of this prod-
uct should be made by qualified service per-
sonnel or system installers.
• The installation shall be carried out in accor
-
dance with all applicable installation rules.
• The connections should comply with local
electrical code.
•
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such
as sunlight, fire or the like.
CAUTION:
•
Any changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
• Before attempting to connect or operate this
product, please read the label on the bottom.
• The network camera is only intended for a con
-
nection to an ethernet or PoE network without
routing to the outside plant.
