22
B-5360 Hardware Manual
Accessing the Camera
Configure the IP Addresses
In order to be able to communicate with the camera from your PC, both the camera and the PC
have to be within the same network segment. In most cases, it means that they both should
have very similar IP addresses, where only the last number of the IP address is different from
each other. There are 2 different approaches to IP Address management in Local Area
Networks
– by DHCP Server or Manually.
Using DHCP Server to Assign IP Addresses
If you have connected the computer and the camera into the network that has a DHCP server
running, then you do not need to configure the IP addresses at all
– both the camera and the
PC would request a unique IP address from DHCP server automatically. In such case, the
camera will immediately be ready for the access from the PC. The user, however, might not
know the IP address of the camera yet. It is necessary to know the IP address of the camera in
other to be able to access it by using a Web browser.
By double-clicking with the left mouse on the camera model, it is possible to automatically
launch the default browser of the PC with the IP address of the target camera filled in the
address bar of the browser already.
If you work with Advidia cameras regularly, then
there is even a better way to discover the
cameras in the network
– by using The Advidia B Series
Camera Finder Utility
. The IP
Utility is a light software tool that can not only discover the cameras, but also list lots of
valuable information, such as IP and MAC addresses, serial numbers, firmware versions, etc,
and allows quick configuration of multiple devices at the same time.
The B Series IP Camera Finder Utility can be downloaded for free from the Advidia website.
With just one click, you can launch the IP Utility and there will be an instant report as follows: