10
B-5360 Hardware Manual
Installation Procedures
This section describes procedures in mounting the camera on a flat surface.
NOTE:
The camera images on this documentation are for reference only and may be different
from the actual camera.
Step 1: Prepare for Installation
1.
Before installing the camera, prepare the additional accessories required for installation.
Required Accessories
Exterior-grade Ethernet Cable with
RJ-45 connector
(not included in the package)
Cable Grommet (Included)
2.
Depending on the material of the mounting surface where the camera will be installed, it
may be necessary to drill the three (3) screw holes and use the supplied anchors. In this
case, attach the included drill template on the surface and drill the screw holes.
