20
B-5360 Hardware Manual
How to Connect Audio Device
The camera comes with an audio jack where an audio input device, such as a microphone with
a built-in amplifier, can be connected. The audio-in jack is covered by a protective cover.
WARNING:
Do not remove this protective cover if the audio-in jack will not be used to ensure it
remains waterproof.
To connect an audio input device, do the following:
1.
Pull to remove the protective cover.
2.
Connect the audio input device.
NOTE:
The microphone must have a built-in amplifier. Connecting an ordinary microphone
will distort sounds and will result in inaudible recording.
3.
If the camera is installed outdoors, be sure to wrap the audio connectors with
Waterproof
Tape
(can be purchased in hardware stores).
DISCLAIMER:
Advidia will not be responsible for camera damage due by water leakage
caused by improper waterproofing of cables.
Audio Input Jack
Audio Device