1.3
Page 12
MPC-
143. User’s Manual
3. DynDNS account configuration (Not supported by all models): in order to avoid
the need to have a fixed IP address to be able to remotely access the device, it is
possible to set up a DynDNS account under the "DDNS setting". Steps to be
followed are:
o
Select “Enable”
o
Fill in information according to your DynDNS account
o
Click on "Load from file" and select "dyndns.org_Register_String.txt " which
contains the connection string to be sent to DynDNS servers.
Figure 11.
“GPRS” tab. DynDNS configuration
NOTE: After configuration is completed, click on "
Set
" button in order to save changes.
NOTE: It is recommended to disable GPRS connection if not used.
