33
Profile Name:
User can chose name for this profile, or use default name defined by system.
SSID:
User can key in the intended SSID name or use pull down menu to select from
available APs.
Power Save Mode:
Choose from CAM [Constantly Awake Mode] or Power Saving Mode.
Network Type:
There are two types, infrastructure and 802.11 Ad-Hoc mode. Under Ad-Hoc
mode, user can also choose the preamble type, the available preamble type includes auto
and long. In addition to that the channel field will be available for setup in Ad-Hoc mode.
RTS Threshold:
User can adjust the RTS threshold number by sliding the bar or key in the
value directly. The default value is 2347.
Fragment Threshold:
User can adjust the Fragment threshold number by sliding the bar or
key in the value directly. The default value is 2346.
Channel:
Only available for setting under Ad-Hoc mode. User can choose the channel
frequency to start their Ad-Hoc network.
Authentication Type:
There are 7 type of authentication modes supported by RaUI. They
are Open, Shared, LEAP, WPA, WPA-PSK, WPA2, WPA2-PSK.
Encryption Type:
For open and shared authentication mode, the selection of encryption type
are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the
encryption type supports both TKIP and AES.
802.1x Setting:
It is an authentication for WPA and WPA2 certificate to server.
WPA Pre-Shared Key:
This is the shared secret between AP and STA. For WPA-PSK and
WPA2-PSK authentication mode, this field must be filled with character longer than 8 and less
than 32 lengths.
WEP Key:
Only valid when using WEP encryption algorithm. The key must matched AP’s key.
There are several formats to enter the keys:
Hexadecimal – 40bits: 10 Hex characters
Hexadecimal – 128bits: 26 Hex characters.
ASCII – 40bits: 5 ASCII characters
ASCII – 128bits: 13 ASCII characters
