64
3.2.2 Link Status
In this section, you can immediately monitor the current connected link status, such as
Link Speed, Throughput, Link Quality, Signal Strength, Noise Level …etc.
Status:
Current connection status. If no connection, it will show Disconnected. Otherwise, the
SSID and BSSID will show here.
Extra Info:
Display the link status and current channel in use.
Channel:
Display the number of the radio channel and the frequency used for the networking.
Link Speed (Mbps):
Display the transmission and reception rate of the network. The
maximum transmission rate is 54Mbps.
Throughput (Kbits/sec):
Display transmits and receives throughout in unit of K bits/sec.
Link Quality:
Display connection quality based on signal strength and TX/RX packet error
rate.
dBm:
If you want to know the signal strength in the unit of dBm, select the check box.
Signal Strength:
Receive signal strength, user can choose to display as percentage or dBm
format.
Signal Strength2:
Receive signal strength 2, user can choose to display as percentage or
dBm format.
