Advantech WISE-6610 Series, User Manual

Page: 23 / 100

12 WISE-6610 Series User Manual
2.4 Connecting the Gateway to Ethernet Port
2.4.1 RJ45 Ethernet Cable Wiring
For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is rec-
ommended. The connector bodies on the RJ45 Ethernet ports are metallic and con-
nected to the GND terminal. For best performance, use shielded cabling. Shielded
cabling may be used to provide further protection.
Figure 2.8 Ethernet Plug & Connector Pin Position
Maximum cable length: 100 meters (328 ft.) for 10/100BaseT.
2.5 Power Supply Installation
1. Insert the power cable into the power socket. The cable locks in place if installed
correctly.
2. Connect the other end to a wall outlet.
The LEDs light when the device is connected to the power source
Figure 2.9 Installing the Power Cable
The following table show the color lines definition:
Straight-thru Cable Wiring Cross-over Cable Wiring
Pin 1 Pin 1 Pin 1 Pin 3
Pin 2 Pin 2 Pin 2 Pin 6
Pin 3 Pin 3 Pin 3 Pin 1
Pin 6 Pin 6 Pin 6 Pin 2
1
8
V+ DI GND D0
Red Yellow Black Gray
LoRa
ETH
+
-
PWR
DA
T
I /
O
WA
N
WISE-66
10