Advantech VariSifter VS1000, Operation/Setup Manual

Page: 33 / 46

(1) (2) (3) (4) (5) (6) (13) (14) (15)
Standard Alternative Min Max
millimeter inches millimeter millimeter millimeter millimeter
125 5 in. 5 3.66 4.51 129.51 8 6.8 9.2
106 4.24 in. 4.24 3.12 3.99 109.99 6.3 5.4 7.2
100 4 in. 4 2.94 3.82 103.82 6.3 5.4 7.2
90 3 1/2 in. 3.5 2.65 3.53 93.53 6.3 5.4 7.2
75 3 in. 3 2.22 3.09 78.09 6.3 5.4 7.2
63 2 1/2 in. 2.5 1.87 2.71 65.71 5.6 4.8 6.4
53 2.12 in. 2.12 1.58 2.39 55.39 5 4.3 5.8
50 2 in. 2 1.49 2.29 52.29 5 4.3 5.8
45 1 3/4 in. 1.75 1.35 2.12 47.12 4.5 3.8 5.2
37.5 1 1/2 in. 1.5 1.13 1.85 39.35 4.5 3.8 5.2
31.5 1 1/4 in. 1.25 0.95 1.63 33.13 4 3.4 4.6
26.5 1.06 in. 1.06 0.802 1.44 27.94 3.55 3 4.1
25 1.00 in. 1 0.758 1.38 26.38 3.55 3 4.1
22.4 7/8 in. 0.875 0.681 1.27 23.67 3.55 3 4.1
19 3/4 in. 0.750 0.579 1.13 20.13 3.15 2.7 3.5
16 5/8 in. 0.625 0.490 0.99 16.99 3.15 2.7 3.6
13.2 0.530 in. 0.530 0.406 0.86 14.06 2.8 2.4 3.2
12.5 1/2 in. 0.500 0.385 0.83 13.33 2.5 2.1 2.9
11.2 7/16 in. 0.438 0.346 0.77 11.97 2.5 2.1 2.9
9.5 3/8 in. 0.375 0.295 0.68 10.18 2.24 1.9 2.6
8 5/16 in. 0.312 0.249 0.60 8.60 2 1.7 2.3
6.7 0.265 in. 0.265 0.210 0.53 7.23 1.8 1.5 2.1
6.3 1/4 in. 0.250 0.197 0.51 6.81 1.8 1.5 2.1
5.6 No. 3 1/2 0.223 0.176 0.47 6.07 1.6 1.3 1.9
4.75 No. 4 0.187 0.150 0.41 5.16 1.6 1.3 1.9
4 No. 5 0.157 0.127 0.37 4.37 1.4 1.2 1.7
3.35 No. 6 0.132 0.107 0.32 3.67 1.25 1.06 1.5
2.8 No. 7 0.110 0.090 0.29 3.09 1.12 0.95 1.3
2.36 No. 8 0.0937 0.076 0.25 2.61 1 0.85 1.15
2 No. 10 0.0787 0.065 0.23 2.23 0.9 0.77 1.04
1.7 No. 12 0.0661 0.056 0.20 1.90 0.8 0.68 0.92
1.4 No. 14 0.0555 0.046 0.18 1.58 0.71 0.6 0.82
1.18 No. 16 0.0469 0.040 0.16 1.34 0.63 0.54 0.72
1 No. 18 0.0394 0.034 0.14 1.14 0.56 0.48 0.64
micrometer inches micrometer micrometer micrometer millimeter
850 No. 20 0.0331 29.1 127 977 0.5 0.43 0.58
710 No. 25 0.0278 24.7 112 822 0.45 0.38 0.52
600 No. 30 0.0234 21.2 101 701 0.4 0.34 0.46
500 No. 35 0.0197 18.0 89 589 0.315 0.27 0.36
425 No. 40 0.0165 15.5 81 506 0.28 0.24 0.32
355 No. 45 0.0139 13.3 72 427 0.224 0.19 0.26
300 No. 50 0.0117 11.5 65 365 0.2 0.17 0.23
250 No. 60 0.0098 9.9 58 308 0.16 0.13 0.19
212 No. 70 0.0083 8.7 52 264 0.14 0.12 0.17
180 No. 80 0.0070 7.6 47 227 0.125 0.106 0.15
150 No. 100 0.0059 6.6 43 193 0.1 0.085 0.115
125 No. 120 0.0049 5.8 38 163 0.09 0.077 0.104
106 No. 140 0.0041 5.2 35 141 0.071 0.06 0.082
90 No. 170 0.0035 4.6 32 122 0.063 0.054 0.072
75 No. 200 0.0029 4.1 29 104 0.05 0.043 0.058
63 No. 230 0.0025 3.7 26 89 0.045 0.038 0.052
53 No. 270 0.0021 3.4 24 77 0.036 0.031 0.041
45 No. 325 0.0017 3.1 22 67 0.032 0.027 0.037
38 No. 400 0.0015 2.9 20 58 0.03 0.024 0.035
32 No. 450 0.0012 2.7 18 50 0.028 0.023 0.033
25 No. 500 0.0010 2.5 16 41 0.025 0.021 0.029
20 No. 635 0.0008 2.3 15 35 0.02 0.017 0.023
Column 3 - These numbers are only approximate but are in use for reference; the sieve shall be identified by the standard designation in millimeters or micrometers.
STANDARD SPECIFICATION FOR WOVEN WIRE TEST SIEVE CLOTH AND TEST SIEVES
ASTM E11 - 15
Nominal Dimensions and Permissible Variations for Sieve Cloth and Compliance, Inspection and Calibration Test Sieves
Sieve Designation
Nominal Sieve
Opening (in.)
± Y
Variation for
Average Opening
Resulting
Maximum
Individual
Opening
+ X
Maximum
Variation for
Opening
Typical
Wire Diameter
Permissible Range
of Choice
Table 1