background image

3

UNO-2372G User Manual

Chapter 1

O

verview

1.3

Accessories 

The accessory list is as follows: 

1 x pin connector for power wiring (Advantech P/N: 1652002205) 

1 x warranty card 

1 x SATA cable (Advantech P/N:1700027329-11)

4 x screws for attaching HDD (Advantech P/N:1930001361)

2 x screws for attaching mPCIe module (Advantech P/N:1930000198)

If any of the above items are missing or damaged, contact your distributor or sales
representative immediately. 

1.4

Hardware Specifications

Operating Temperature:

 -20 ~ 60 °C/-4 ~ 140 °F

Power Requirements: 

10 - 36 V

DC

 

Power Consumption: 

30 W (typical), 42 W (max.)

System Hardware:

CPU: 

UNO-2372G-E0 series: Intel® Atom™ E3845 (1.91 GHz)
UNO-2372G-J0 series: Intel® Celeron® J1900 (2.0 GHz)

Memory: 

4 GB of DDR3L 1600 MHz (up to 8 GB)

Graphics Engine: 

Intel® HD Graphics

Ethernet:

 Intel® i210 GbE, 802.10av, IEEE1588/802.1AS, 803.3az 

COM: 

4 x RS232/422/485

USB: 

4 x USB (3 x USB 2.0, 1 x USB 3.0)

Storage: 

1 x full-size mSATA slot (shared with 1 x mPCIe slot)
1 x drive bay for SATA 2.5" HDD (compatible with an HDD height of 9.5 mm) 

Expansion: 

2 x full-size mPCIe slots (1 x mPCIe also supports mSATA)

Display: 

1 x DP with 2560 x 1440 resolution @60 Hz and 1 x HDMI with 

1920 x 1080 resolution @ 60 Hz

Hardware Security:

 TPM2.0 (UNO-2372G-J series only)

Because UNO-2372G features a modularized design, Advantech offers both single-
and double-stack models.
* Single stack: UNO-2372G-E021AE/UNO-2372G-J021AE
* Double stack: UNO-2372G-E022AE/UNO-2372G-J022AE
The double-stack model combines a single-stack model with an extension kit for
iDoor technology.

Summary of Contents for UNO-2372G













































Reviews: