21
UNO-2372G User Manual
Appendix A
S
ystem
Settings
/Pin
A
ssignments
A.2
Board Connectors and Switches
The UNO-2372G board features several connectors and jumpers. The following sec-
tions explain how to configure the UNO-2372G hardware.
Figure A.1 shows the locations of the UNO-2372G connectors and switches.
Figure A.1 Connector and jumper locations (front)
Table A.2: Connectors and Jumpers
Label Function
CN20
Power input connector
CN35
HDMI connector
CN35
DisplayPort connector
CN18
2 x USB 2.0 connector
CN19
USB 3.0 and USB 2.0 connector
CN25
RJ45 connector
PWR1 Power
button
RST1
Reset button
COM1 ~ 4
COM port connector
MINI1
PCI Express mini card socket (white connector)
MINI2
PCI Express mini card socket/mSATA (black connector)
CN8/CN9
SATA connector/SATA power connector
BH1
RTC battery connector
CN10
Internal GPIO pin header
CN21 Audio
line-out
CN30
Internal power connector, voltage is the same as DCIN
SW1
AT/ATX mode switch. 1 OFF/ 2 ON -> ATX mode, 1 ON/ 2 OFF -> AT
mode
CN36
Clear COMS switch; Pins 2 ~ 1 -> normal, Pins 2 ~ 3 -> Clear
