Advantech TPC-2000 Series, User Manual

Page: 18 / 74

TPC-2000 Series User Manual 10
3. Attach the box module to the panel module via the board-to-board connector.
4. Connect the power connector to 24 VDC power lines. The power lines can
either be from a power adapter or an in-house power source.
Figure 2.4 Power connector and pin assignment
5. Plug the power wire into the system power receptor.
Figure 2.5 Power receptor & button pin assignment
6. Attach power to the system.
7. Calibrate the touchscreen. (only applicable to 12.1”)
Warning! It is suggested turning OFF the system power to plug in or pull out the
memory card.
Il est suggéré de désactiver l'alimentation du système que vous bran
-
chez ou retirez le carte mémoire.