Advantech TPC-2000 Series, User Manual

Page: 16 / 74

TPC-2000 Series User Manual 8
2.1 Transport and Unpacking
When accepting a delivery, please check the packaging for visible damage and
check the delivery for completeness by comparing it with your order. If you notice any
shipping damage or inconsistencies between the contents and your order, please
inform the responsible delivery service immediately.
During transportation, the TPC should be protected from excessive mechanical
stress. If the TPC is transported or stored without packaging, shocks, vibrations,
pressure and moisture may impact the unprotected unit. A damaged packaging indi-
cates that ambient conditions have already had a massive impact on the device.
Therefore, please use the original packaging during transportation and storage.
If the TPC is transported in cold weather or is exposed to extreme variations in tem-
perature, make sure that moisture (condensation) does not build up on or inside the
HMI device. Moisture can result in short-circuits in electrical circuits and damage the
device. To avoid that, please store the TPC in a dry place and bring the TPC to room
temperature before starting it up. If condensation occurs, a delay time of approxi-
mately 12 hours must be allowed to make sure the TPC is completely dry before the
TPC is switched on.
2.2 System Setup
Note! If you purchase the Computing Box (TPC-B200) & Panel (FPM-Display)
separately, please simply use the five screws of 1930001361 to connect
the Computer Box and Panel.