Web GUI Monitoring & Control
Figure 4.9: Alarms and Warnings Monitoring Window
4.6.1
General
The following paragraphs detail the general alarms shown in Figure 4.9.
4.6.1.1
Lock State
Allows an alarm or warning to be raised if the demodulator is unlocked.
4.6.1.2
LNB Over-Current
Allows an alarm or warning to be raised if the LNB supply current exceeds the design limit.
4.6.1.3
FPGA Loading Failed
Allows an alarm or warning to be raised if one or more of the FPGA devices in the demodulator
fails to configure correctly.
4.6.1.4
SRAM2 Failure
Allows an alarm or warning to be raised if one of the SRAM devices on the demodulator board
fails to program correctly.
4.6.1.5
Board Temperature
Allows an alarm or warning to be raised if the temperature of the demodulator board exceeds
the user specified temperature limit.
4.6.1.6
FPGA Temperature
Allows an alarm or warning to be raised if the core temperature of one or more of the FPGA
devices exceeds the design limit.
SBD75e Series Demodulator Installation and Operation Manual
4-11
