Web GUI Monitoring & Control
Figure 4.25: Stream Isolation Window in Automatic Mode
In the example above, only ‘Output 0’ is enabled. As the output interface modulation and
coding parameter is currently set to ANY, then all the legal MODCOD values are ‘Not Filtered’,
meaning that they are allowed through the MODCOD filter to the output interface.
4.9.2.2
ISI Assignment Function – Deactivated
The configuration of the ISI Assignment function may be viewed by opening the ‘Current View’
drop-down box and selecting Assign ISI. A window, similar to that shown in Figure 4.26 is
displayed. In this example, no ISI assignment has been activated because there are no
constraints on the delivery of the stream with ISI 1 to the demodulator.
4-30
SBD75e Series Demodulator Installation and Operation Manual