Front Panel Monitoring & Control
Menu Item
Operations
Create Profile >
This submenu will allow a name to be created and the configuration to be stored to
non-volatile memory on the card.
Delete Profile >
This submenu is only displayed if profiles have been stored. It will allow unwanted
profiles to be deleted. A profile should first be loaded then it can be deleted from the
memory on the card.
2.
Select the Load Profile option. The following screen is displayed.
MUX_A:
MUX_B:
Note
The down arrow indicates that there are more profiles available. 10 profiles are currently supported.
3.
Select the required profile. The following warning screen is displayed.
Loading Profile: MUX_A
ENTER = Confirm : CLEAR = Cancel
The new configuration will be pending until the unit is reconfigured.
To create and save a new profile:
1.
Select the Create Profile option from the Profiles sub-menu. The following screen is displayed.
Name
Profile:
Save
Profile:
Note
Until a profile has been named, it cannot be saved and will not appear on the menu.
2.
Select the Name Profile option. The following screen is displayed.
MUX_B
Delete
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Select
3.
Use the left and right arrows to navigate to the character required or use the numeric pad
0-9 to enter numbers.
4.
Press the down arrow to select the character and the up arrow to delete.
5.
When the name entry is complete, press the ENTER key.
Note
A total of 30 upper case characters can be entered on the front panel display. When using the GUI, up
to 64 upper and lower case characters may be entered.
6.
Select the Save option. The following screen is displayed.
Saving Profile: MUX_B
ENTER = Confirm : CLEAR = Cancel
3-6
SBD75e Series Demodulator Installation and Operation Manual
