Advantech PPC-125 User Manual Download Page 8

Page: 8 / 60

PPC-125 User Manual

viii

Disassembling the Panel PC .................................................................. 18

Figure 4.1 Unfastening the Rear Cover..................................... 18
Figure 4.2 Disconnecting the Fan Connector ............................ 19
Figure 4.3 The PPC without the Rear Cover ............................. 19

4.3

Installing the 2.5" Hard Disk Drive .......................................................... 20

Figure 4.4 The PPC Side Cover ................................................ 20
Figure 4.5 The PPC HDD .......................................................... 20
Figure 4.6 The PPC HDD .......................................................... 21
Figure 4.7 Plugging in the SATA Cable..................................... 21
Figure 4.8 Fastening the HDD metal frame to the HDD ............ 22

4.4

Installing the Central Processing Unit (CPU) .......................................... 22

Figure 4.9 Placing the CPU in the Socket ................................. 23
Figure 4.10Tightening the Screws on the CPU .......................... 23
Figure 4.11Placing the Heatsink and Fan on the CPU and then

Fastening.................................................................. 24

4.5

Installing the DDR2 SDRAM Memory Module ........................................ 24

Figure 4.12Placing the Memory Module in the SODIMM Socket 24

4.6

Installing the Optical Device Drive .......................................................... 25

Figure 4.13Rear Cover Photo..................................................... 25
Figure 4.14Rear Cover Photo with ODD Bracket ....................... 25
Figure 4.15Riser Card Installation .............................................. 26
Figure 4.16Riser Card and ODD Connection ............................. 26
Figure 4.17Add-on ODD Cover .................................................. 27

Chapter

Jumpers and Connectors

................. 29

5.1

Jumpers and Connectors........................................................................ 30
5.1.1

Setting Jumpers.......................................................................... 30

5.1.2

Jumpers ...................................................................................... 31

5.1.3

Jumper and Connector Locations............................................... 32
Figure 5.1 Jumpers & Connectors on PPC-125 Motherboard ... 32

5.1.4

Summary of Contents for PPC-125





























































Search results

Summary of Contents for PPC-125

Reviews:

Advantech PPC-125, User Manual, Page: 8 / 60

Search results

Summary of Contents for PPC-125

Reviews: