Advantech POC-615 Series, User Manual

Page: 25 / 64

13 POC-615 User Manual
C
ha
pte
r 2
Sy
ste
m
S
etu
p
2.2.3 Ground Pin Connection
An equipotential terminal is provided to facilitate connection to the hospital’s ground/
earthing system.
1. On the underside of the POC-615 terminal, locate the equipotential terminal pin
socket.
Figure 2.5 POC-615 Equipotential Terminal Pin
2. Prepare the grounding cable by connecting one end to the hospital’s ground/
earthing system.
Figure 2.6 Grounding Cable with Connector
3. Connect the other side of the grounding cable to the equipotential terminal pin
socket at the underside of POC-615.
2.3 BIOS Setup
Your POC-615 terminal was most likely setup and pre-configured by the vendor prior
to delivery. However, you may still find it necessary to access the BIOS setup pro -
gram to modify the system configuration data, such as the date and time or type of
hard drive.
The BIOS utility is stored in read-only memory and can be accessed when the device
is powered on by pressing <F2> or <Del> during boot up. The configuration settings
are recorded in CMOS RAM. This memory is backed up by a battery to ensure it is
retained when the system is powered off.
Upon boot up, the system reads the settings stored in CMOS RAM and compares the
data to the results of the equipment check performed during the power on self-test
(POST). If a discrepancy is identified, an error message will be displayed onscreen,
and users will be prompted to run the setup program.