manualshive.com logo in svg

Advantech PCIE-1816, User Manual, Page: 3 / 62

Share
Download
Advantech PCIE-1816 User Manual Download Page 3

iii

PCIE-1816_1816H User Manual

 

CE

This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind  of  cable  is  available  from  Advantech.  Please  contact  your  local  supplier  for
ordering information.

Technical Support and Assistance

1.

Visit the Advantech web site at 

http://support.advantech.com.tw/

 where you 

can find the latest information about the product.

2.

Contact your distributor, sales representative, or Advantech's customer service 
center for technical support if you need additional assistance. Have the follow-
ing information ready before you call:

–

Product name and serial number

–

Description of your peripheral attachments

–

Description of your software (operating system, version, application software, 

etc.)

–

A complete description of the problem

–

The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, Contact your dealer imme-
diately.

PCIE-1816/1816H DA&C card

Startup or User Manual

Companion DVD-ROM with DAQNavi drivers included

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from
damage.

1.

To avoid electrical shock, always disconnect the power from your PC chassis 
before you work on it. Don't touch any components on the CPU card or other 
cards while the PC is on.

2.

Disconnect power before making any configuration changes. The sudden rush 
of power as you connect a jumper or install a card may damage sensitive elec-
tronic components.

Summary of Contents for PCIE-1816































































Reviews:

No comments