manualshive.com logo in svg

Advantech PCIE-1816, User Manual, Page: 12 / 62

Share
Download
Advantech PCIE-1816 User Manual Download Page 12

PCIE-1816_1816H User Manual

6

For information about using other function groups or other development tools, please
refer to the Using DAQNavi SDK chapter in the DAQNavi SDK Manual, or the video
tutorials in the Advantech Navigator.

Programming with DAQNavi Device Drivers Function Library 

Advantech DAQNavi Device Drivers offer a rich function library that can be utilized in
various  application  programs.  This  function  library  consists  of  numerous  APIs  that
support  many  development  tools,  such  as  Visual    Studio  .Net,  Visual  C++,  Visual
Basic, Delphi and C++ Builder. 
According to their specific functions or services, APIs can be categorized into several
function groups: 

Analog Input Function Group 

Analog Output Function Group 

Digital Input/Output Function Group 

Counter Function Group 

Port Function Group (direct I/O) 

Event Function Group 

For the usage and parameters of each function, please refer to the 

Using DAQNavi

SDK

 chapter in the 

DAQNavi SDK Manual

.

Troubleshooting DAQNavi Device Drivers Error 

Driver functions will return a status code when they are called to perform a certain
task for the application. When a function returns a code that is not zero, it means the
function  has  failed  to  perform  its  designated  function.  To  troubleshoot  the  Device
Drivers error, you can pass the error, you can check the error code and error descrip-
tion within the Error Control of each function in the DAQNavi SDK Manual.

1.6

Accessories 

Advantech  offers  a  complete  set  of  accessory  products  to  support  the  PCIE-1816/
1816H card. These accessories include: 

Wiring Cables 

PCL-10168-1E

 68-pin SCSI Shielded Cable, 1 m

PCL-10168-2E

 68-pin SCSI Shielded Cable, 2 m 

PCL-10168H-1E

 68-pin SCSI Shielded Cable with Noise Rejecting, 1 m

PCL-10168H-2E

 68-pin SCSI Shielded Cable with Noise Rejecting, 2 m

Wiring Boards 

ADAM-3968 68-pin DIN-rail SCSI Wiring Board

Summary of Contents for PCIE-1816































































Reviews:

No comments