Advantech PCIE-1805, User Manual

Page: 15 / 42

9 PCIE-1805 User Manual
Chapter 2
Installation
6. Fasten the bracket of the PCI card on the back panel rail of the computer with
screws.
7. Plug in the power cord and turn on the computer.
2.3 Device Setup & Configuration
The Advantech Navigator program is a utility that allows you to set up, configure and
test your device, and later stores your settings on the system registry. These settings
will be used when you call the APIs of Advantech Device Drivers.
Setting Up the Device
1. To set up the I/O device for your card, you must first run the Advantech Naviga-
tor program (by accessing Start/Programs/Advantech Automation/DAQNavi/
Advantech Navigator).
2. You can then view the device(s) already installed on your system (if any) on the
Installed Devices list box. If the software and hardware installation are com-
pleted, you will see PCIE-1805 card in the Installed Devices list.
Figure 2.1 The Device Setting of PCIE-1805