Advantech PCI-6870 Series, User Manual

Page: 46 / 130

37 Chapter 3 Award BIOS Setup
You will see “Confirm Password.” Type it again, and press <Enter>.
Select Set Password again, and at the “Enter Password” prompt, enter
the new password and press <Enter>.
At the “Confirm Password” prompt, retype the new password, and
press <Enter>.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Disable Password
Choose the Set Password option from the CMOS Setup Utility main
menu and press <Enter>.
When you see “Enter Password,” enter the existing password and
press <Enter>.
You will see “Confirm Password.” Type it again, and press <Enter>.
Select Set Password again, and at the “Enter Password” prompt, don’t
enter anything; just press <Enter>.
At the “Confirm Password” prompt, again don’t type in anything; just
press <Enter>.
Select Save & Exit Setup, type <Y>, then <Enter>.
3.1.12 Save & Exit Setup
If you select this, type <Y>, and press the [Enter] key, the values
entered in the setup utilities will be recorded in the CMOS memory of
the chipset. The microprocessor will check this every time you turn
your system on and compare this to what it finds as it checks the
system. This record is required for the system to operate.
3.1.13 Exit Without Saving
Selecting this option and pressing the [Enter] key lets you exit the
Setup program without recording any new values or changing old
ones.