Advantech PCA-6653, User Manual

Page: 20 / 34

16 PCA-6653 User's Manual
This chapter describes the installation and operation of the software
drivers on the included Display Driver diskette.
Simultaneous Display Mode
The 65545 VGA BIOS supports monochrome LCD, EL, color TFT
and STN LCD flat panel displays. It also supports interlaced and non-
interlaced analog monitors (VGA color and VGA monochrome) in
high-resolution modes while maintaining complete IBM VGA
compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are NOT
supported. Multiple frequency (multisync) monitors are supported as
analog monitors.
Both CRT and panel displays can be used simultaneously. The PCA-
6653 can be set in one of three configurations: on a CRT, on a flat
panel display, or on both simultaneously. The system is initially set to
simultaneous display mode. In the utility diskette, there are three
.COM files which can be used to select the display. Simply type the
filename at the DOS prompt:
CT.COM Enables CRT display only
FP.COM Enables panel display only
SM.COM Enables both displays at the same time.
Sleep Mode
The Display Driver diskette contains two files that support sleep
mode. Simply type the filename at the DOS prompt:
ON.COM switches to normal display mode.
OFF.COM switches to sleep mode.