Advantech PCA-6653, User Manual

Page: 29 / 34

Chapter 3 Software Drivers and Utilities 25
Step 6: At this point the Installation Menu will prompt you for the
name of your new Lotus configuration file. The Lotus system will
prompt you with the default value — 123.SET, but you may want to
use a filename that indicates the resolution of its driver. For example,
if you installed the 132 column by 25 line driver, you could name this
driver 132X25.SET, or if you installed the 80 by 50 driver, you may
want to call the file 80X50.SET.
Step 7: The installation of your Lotus 1-2-3 driver is now complete.
You will need to exit the Lotus installation program at this point. At
the main Lotus Installation Menu, select Exit.
NOTE: If your driver set is not 123.SET, you have to type the
filename of your driver set in the command line when you start Lotus
1-2-3. For example, if you named your driver set 132X25.SET, type
the following to start Lotus 1-2-3:
123 132X25.SET <ENTER>