Advantech PCA-6653, User Manual

Page: 26 / 34

22 PCA-6653 User's Manual
AutoCAD R12
These drivers are designed to work with Autodesk AutoCAD R12.
They conform to the Autodesk Device Interface (ADI) for Rendering
drivers and Display drivers. These display list drivers accelerate
redraw, pan, and zoom functions.
Driver installation
Step 1: Place the Display Driver diskette in drive A. Type A: <EN-
TER> to make this the default drive. Type SETUP <ENTER> to run
the SETUP program. Press any key to get to the applications list.
Using the arrow keys, select AutoCAD Release 12 and press <EN-
TER>. This will display a list of supported driver resolutions. Using
the arrow keys and the <ENTER> key, select the resolutions that are
appropriate for your monitor. When all of the desired resolutions have
been selected, press <END> to begin the installation. At this point you
will be asked for a drive and directory to copy the driver files. Enter
the drive and directory that contains the installed AutoCAD R12. If
the destination directory does not exist you will be asked for confir-
mation. When the installation is complete, press any key to continue.
Press <ESC> followed by Y to exit to DOS.
Step 2: Go to the AutoCAD directory where the new drivers were
installed and run the driver installation program by typing ACAD12 -
r <ENTER>. This program will configure your AutoCAD R12 to use
the new display drivers. Select TurboDLD Classic.
Configuring TurboDLD
Select Configure Video Display. In Display Device Configuration
choose Select Graphics Board/Resolution. Then choose Select
Display Graphics Board. After choosing a graphics board, go to
Select Display Resolution. After selecting the display resolution, save
the new configuration, and return to the main menu.
Basic Configuration Menu
This menu allows you to modify:
Number of AutoCAD Command Lines