Advantech PCA-6653, User Manual

Page: 28 / 34

24 PCA-6653 User's Manual
Lotus 1-2-3 and Lotus Symphony
These drivers are designed to work with Lotus 1-2-3 versions 2.0,
2.01 and 2.2, and with Lotus Symphony versions 1.0 and 1.1.
Driver installation
Step 1: Place the Display Driver diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program by
typing SETUP <ENTER>. Press any key to display a list of supported
applications. Use the arrow keys to select Lotus/Symphony, and press
<ENTER>. A list of supported screen resolutions will be displayed.
Use the arrow keys to select the desired screen resolution and press
<ENTER>. (Make sure your monitor is able to display the resolution
desired) Press <END> to begin the driver installation process. A
default drive and directory path will be displayed. Use the backspace
key to erase this default and type in the 123 directory. At this point
you may be asked to create the target directory if it does not already
exist. After the files have been installed, press any key to return to the
list of supported applications. Press <ESC> followed by Y to exit to
DOS. Copy all the files that were just created in the temporary
directory onto a formatted floppy diskette.
Step 2: Go to your 123 directory, and start the installation program.
Type the following commands:
C: <ENTER>
INSTALL <ENTER>
Step 3: The Lotus installation program will load and present the
installation menu. From this menu, select Advanced Options. From
the Advanced Options menu, select Add New Drivers To Library.
From the Add New Drivers Menu, select Modify Current Driver Set.
From the Modify Driver Set Menu, select Text Display. From the Text
Display menu, select one of drivers.
Step 4: After the selection of the appropriate VGA display driver, you
will need to exit this menu and return to the Main Lotus Installation
Menu. Do this by selecting Return To Menu.
Step 5: At the Main Lotus Installation Menu, select Save Changes.