Advantech MIO-5393, User Manual

Page: 13 / 96

5 MIO-5393 User Manual
Chapter 1
G
eneral
Information
– Max load
E-2276ME: 102.75W
i7-9850HE: 95.38W
i7-9850HL: 44.55W
i5-8400H: 74.44W
– Idle mode
E-2276ME/i7-9850HE/i7-9850HL/i58400H: 11.55W
 Power Consumption Conditions:
– Test software:
1. Intel (R) Thermal Analysis Tool 6.5.1001 (CPU-All and Gfx with 100%).
2. BrunIn Test V8.1 Pro (1025)(CPU, RAM, 2D&3D Graphics and Disk
with 100%)
– Max. load: Measure the maximum current value which system under maxi-
mum load (CPU: Top speed, RAM &Graphic: Full loading)
– Idle mode: Measure the current value when system in windows mode and
without running any program
 RTC Battery:
– Typical Voltage: 3.0 V
– Normal discharge capacity: 210 mAh
1.2.5 Environmental
 Operating Temperature: 0 ~ 60°C (32 ~ 140°F)
 Operating Humidity: 40°C @ 95% RH Non-Condensing
 Storage Temperature: Storage temperature: -40~85°C
 Storage Humidity: Relative humidity: 95% @ 60°C
1.3 Block Diagram
Nano SIM
48-bit LVDS
eDP
(4k@60Hz)
CAN Bus
SMBus
I2C
2 x 8-bit GPIO
Mobile CPU
256MB BIOS EIO-IS201 TPM 2.0
Intel Cannon Lake
Mobile PCH-H
CM246 (support ECC)
QM370
2 x DDR4 SODIMM
2400MHz dual channel
up to 64G
2 x GbE
PTN3460
DDI x1
DDI x1
DDR channel
2 x USB 3.1 Gen2
2 x USB 3.1 Gen2
Line-in/Out/MIC
COM1 RS-232/422/485 COM2 RS-232/422/485
eDP
M.2 Key E
PCIe x 1 (Gen.3)
USB2.0 x 1
M.2 Key M
PCIe x 4 (Gen.3)
SATA III x 1
M.2 Key B
PCIe x 2 (Gen.3)
SATA III x 1
USB2.0 x 1
2 x SATA III
MIOe
SATA III x 2
DDI x 1, PCIe x4,
USB3.0/2.0
LPC, SMBUS, Rest,
Line out, Power on
I210
PCIe x1
DMI 3.0
Audio Codec
I219
PCIe x1
SPI LPC SPI
DP 1.2 (DP++) (4k@60Hz)
HDMI 1.4 (4k@30Hz)
*Function block with dotted line support by request