manualshive.com logo in svg

Advantech MIC-3369C, User Manual

Share
Download
Advantech MIC-3369C User Manual Download Page 70

MIC-3369 User’s Manual

60

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive 
supports it and the operating environment includes a DMA driver (Win-
dows 95 OSR2 or a third-party IDE bus master driver). If your hard drive 
and your system software both support Ultra DMA/33 and Ultra DMA/66 
and Ultra DMA/100, select Auto to enable BIOS support. The settings 
are: Auto (Default), Disabled.

Figure 4.8: Onboard Device setup screen

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) 1.1 
controller. The settings are: Enabled (Default), Disabled.

USB 2.0 Controller

Select Enabled if your system contains a Universal Serial Bus (USB) 1.1/
2.0 controller. The settings are: Enabled (Default), Disabled.

USB Keyboard/Mouse Support

Select Enabled if you use USB KB/Mouse in DOS mode. 

Summary of Contents for MIC-3369C























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands