manualshive.com logo in svg

Advantech MIC-3369C, User Manual

Share
Download
Advantech MIC-3369C User Manual Download Page 65

55

Chapter 4  

OS Select For DRAM > 64MB

Allows OS2® to be used with > 64 MB of DRAM. Settings are Non-OS/
2 (default) and OS2. Set to OS/2 if using more than 64MB and running 
OS/2.

Small logo (EPA) show

Default is Disabled.

4.1.4 Advanced Chipset Features Setup

The Advanced Chipset Features Setup option is used to change the values 
of the chipset registers. These registers control most of the system options 
in the computer. Choose the "ADVANCED CHIPSET FEATURES" from 
the Main Menu and the following screen will appear.
 

Figure 4.4: Advanced Chipset features setup screen

DRAM Data Integrity Mode

The settings are ECC (Default) and non-ECC.

System BIOS Cacheable

Selecting Enabled allows caching of the system BIOS ROM at F0000h-
FFFFFh, resulting in better system performance. However, if any pro-
gram writes to this memory area, a system error may result. The settings 
are: Enabled (Default) and Disabled. 

Summary of Contents for MIC-3369C























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands