manualshive.com logo in svg

Advantech MIC-3369C, User Manual

Share
Download
Advantech MIC-3369C User Manual Download Page 62

MIC-3369 User’s Manual

52

4.1.3 Advanced BIOS Features Setup

The "Advance BIOS FEATURES" screen will appear after the BIOS 
FEATURES SETUP item is chosen from the CMOS SETUP UTILITY 
Menu. This screen allows the user to configure the board according to his 
particular requirements. Below are some major items that are provided in 
the BIOS FEATURES SETUP screen:
 

Figure 4.3: Advanced BIOS features setup screen

Virus Warning

During and after the system boots up, any attempt to write to the boot sec-
tor or partition table of the hard disk drive will halt the system. If this 
happens, a warning message will be displayed. You can run the anti-virus 
program to locate the problem. If Virus Warning is disabled, no warning 
message will appear if anything attempts to access the boot sector or hard 
disk partition.

CPU L1 & L2 Cache

The default value is Enabled.
Enabled (default)

Enable cache

Disabled

Disable cache

Note:

The internal cache is built into the 
processor.

Summary of Contents for MIC-3369C























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands