Product introduction
20
Advantech LNC Technology Co., Ltd.
Advantech-LNC
DI must be in the E24V and EGND power system, otherwise there will be abnormal .
(2) MDI connector
◎
Description: Connection to MDI unit.
◎
Connector description: 2.54mm 26PIN box header connector.
(3) OP connector
◎
Description: Connection to OP unit. Provide 5V level DI
：
80 points DO
：
80 points.
◎
Connector description: 2.54mm 34PIN box header connector.
(4)SIO connector
◎
Description: Connection to SIO unit.
◎
Connector description: D_SUB 15PIN (Male) connector
Must use shielded twisted-pair type cable to reduce noise interference; ALNC can provide
standard wires for selection.
Separate these wiring min. 30 cm from themain circuit wiresand don
’
t lay signal wires in the
same duct or bundle with them.
1.4.5
Analog output
