Advantech iDAQ-731 User Manual Download Page 3

Page: 3 / 54

iii

iDAQ-731_751_763D User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

type of cable is available from Advantech. Please contact your local supplier for

ordering information.
Test conditions for passing also include the equipment being operated within an

industrial enclosure. In order to protect the product from damage caused by electro

static discharge (ESD) and EMI leakage, we strongly recommend the use of CE-

compliant industrial enclosure products.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A dig

ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro

vide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera

tion of this equipment in a residential area is likely to cause harmful interference. In

such cases, users are required to correct the interference at their own expense

警告使用者

這是甲類測試產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，
使用者會被要求採取某些適當的對策。

Technical Support and Assistance

Visit the Advantech website at www.advantech.com/support to obtain the latest

product information.

Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before calling:

–

Product name and serial number

–

Description of your peripheral attachments

–

Description of your software (operating system, version, application software,

etc.)

–

A complete description of the problem

–

The exact wording of any error messages

Summary of Contents for iDAQ-731























































Search results

Summary of Contents for iDAQ-731

Reviews:

Related manuals for iDAQ-731

Brands by name

Popular brands

Advantech iDAQ-731, User Manual

Search results

Summary of Contents for iDAQ-731

Reviews:

Related manuals for iDAQ-731

Brands by name

Popular brands